Chapter 225： Install PK (below)

The engineer responsible for the record is very responsible, and the process records on both sides are recorded in great detail. They not only recorded the operation of each process, but also recorded the installation angle of certain parts and the tightening torque of some nuts. Ben

On the other side of the Chi Tech Group, these angles or torque values ​​are measured by special instruments, and the records are normal. However, Guo Tailai here, some of the engineers who were recorded recorded a question mark.

For example, the installation angle, Guo Tai is installed according to the design angle. But the engineer who recorded did not see that he used any tool to measure the angle, but only when he reached out and picked up the piston, he directly plugged it in. The torque value has a torque wrench. The recordable engineer did not see Guo Tai to look at the reading, but only reported the value.

Therefore, Guo Tailai's installation details on this side were drawn by two engineers responsible for recording the question mark. The data is still recorded according to the data that Guo Tailai said, but there is obviously doubt.

Guo Tailai did not explain this, and he did not intend to explain it at all. Anyway, some people in Mercedes know that they can achieve accurate values ​​without using tools. He does not have the obligation to confuse everyone who has doubts.

The engine is comprehensively tested on the test bench to determine that the engine is working well and to get the most intuitive first-hand data. This belongs to Mercedes-Benz's internal quality inspection, and will be submitted to McLaren after the quality inspection is passed. Then, McLaren’s technical director decided whether to use the engine in the f1 race. Two

The engines started one by one, only to hear the sound of the two engines. The experienced old technicians knew that they had lost.

The engine that Guo Tailai assembled, the vibration is smaller, the sound is more balanced, and it is even better than the one they assembled. in

In the process of large-scale industrial manufacturing, there are always a few pieces of workpieces with very good machining precision, and there are always several assembly precisions. The sounds of those old technicians have also been used in their own careers. I have heard it, but that is only one of the tens of thousands of units that have such performance. But Guo Tailai only assembled one, and there is such a voice, they are not as good as they are. Such as

If it is a different component, it can also find the reason, but it is also the component that Guo Tailai built, and it has been tested at the Mercedes-Benz headquarters and the industrial laboratory. The same processing precision, and then find the reason from the parts, it will not It is suitable.

This group of old mechanics, simply and negligently, did not wait for the test data to come out.

Fortunately, when the comprehensive data of the all-titanium engine is higher than the data of some titanium alloy engines, the smile on the face of McLaren’s technical director can’t be suppressed. This test data is about 7 percent higher than the one they used in the car, and it is lighter than a dozen kilograms. Even the part of the titanium engine, the performance is 2% higher, and the weight is lighter, because some parts are made of aluminum alloy, and the density is lower than that of titanium alloy.

At this time, the technical director regretted agreeing to the game. But fortunately, there is still time, and Guo Tailai can reassemble that part of the titanium engine. As long as it can match the performance of another engine, the two engines are estimated to be enough for all the stations this year. The strength of titanium alloy engines is much stronger than that of cast iron and aluminum alloys.

However, this is only the expectation of the technical director, can be achieved, but also installed in the car, after each game after the game to get detailed data can be supported. However, it is only a 7% increase in overall performance, and it is enough for the technical director to wake up. Inside

After the quality inspection, it must be packaged and transported to the team, which has nothing to do with Guo Tailai. According to the agreement of both parties, after Guo Tailai re-disassembled the part of the titanium alloy engine and reinstalled it, the cooperation content has been completed. Mercedes-Benz is very refreshing payment, the vice president came forward and discussed with Guo Tailai about further cooperation.

Before the negotiations, Guo Tailai had already telephoned Zhang Jie and Lin Jiayi to let them join us and negotiated with Mercedes-Benz.

The content of the cooperation is limited to all titanium alloy engines. Guo Tailai is a manual operation. It is certainly meaningless to talk to him about mass production, but the more such manual creation, the favorite for some nobles in the upper class. For example, Rolls-Royce, which is known as the best hand-made, has won the favor of many nobles.

Guo Tailai's all-titanium engine can cooperate with Mercedes-Benz to launch the top-grade hand-made limited edition of Mercedes-Benz's most high-end s series or off-road g series. I believe this gimmick will definitely get a group of top customers. and

What Guo Tailai has to do is to build an all-titanium engine. Guo Tailai has no objection to this. As long as it is not very large, Guo Tailai can fully promise that everyone can talk about the price. Lin Jiayi and Zhang Jie are responsible for fixing the price negotiations and legal issues. forest

Jiayi had to hand over the company's construction to Mi Feifei, let her take over her job, and flew to Germany with her sister Zhang, and began negotiations with Mercedes-Benz. hair

After the motives were assembled, Guo Tailai also specially consulted Mercedes-Benz and McLaren. Whether they have the relationship of the French Louvre, they can match up to see the true beauty of "Mona Lisa's Smile". It is a pity that both sides have shook their heads with some regrets. There are quite a few friends in France, but they have not yet met Guo Tailai’s request.

Such cooperation cannot be negotiated overnight. The last time Guo Tailai promised was very refreshing, but he also knew that he must have suffered a lot. Guo Tailai himself is not suitable for such a thing. He is fighting for conditions and little by little negotiation. He is not good at it at all. Therefore, professional matters are still handed over to professional people. They only need to tell them about the bottom line. Then let them go to negotiations, Guo Tailai himself waits for the results. this

I thought that this kind of negotiation would be at most a few days. I didn't expect that after a week, I still couldn't negotiate. The focus of the dispute between the two sides is that Mercedes-Benz hopes that Guo Tailai can only provide services to their family, and Guo Tailai is obviously not happy.

“Guo Zong, I think, your characteristics are suitable for cooperation with some manufacturers who build cars by hand.” Lin Jiayi also angered the restrictions on Mercedes-Benz. After not talking about it in a week, he suggested to Guo Tailai: “Maybe we can contact Rolls-Royce. , Koenigsegg, Pagani, these producers, there is no need to be killed with Mercedes-Benz, what do you mean by Guo?"