Chapter 527： Superyacht (on)

The 572th chapter on the superyacht

In general, the core machine is an engine core component consisting of a compressor, a combustion chamber, and a turbine developed to shorten the new machine development cycle, improve reliability, or develop various types of gas turbine engines.

Gas turbines, turbofan jet engines, turboprop engines, and turboshaft engines work similarly, all of which belong to rotor-type engines, all developed from the core machine. The turbofan engine is the kind of turboshaft engine used in fighters and passenger planes. The propeller engine turboprop engine used in fixed-wing aircraft is to use the transmission shaft to output the torque. The helicopter is used for this gas turbine. Transformed from the turboshaft engine,

Adding some performances such as seawater corrosion resistance, gas turbines can be used on warships. Civil cargo ships basically do not need such things, because they are too fuel-intensive and not cost-effective. The combination of the diesel engine and the gas turbine is used in the warship. The diesel engine is used for cruising, and the gas turbine is used for combat.

What Guo Tailai has to do is such a combined marine engine. Of course, it is certainly not an exaggeration to promote thousands of tons of warships of tens of tons. A small yacht is worth a few hundred tons. Otherwise, how can it speed up?

As early as last year, Guo Tailai asked General Li to help select a yacht manufacturer and rent a shipyard, and before the Spring Festival, large-scale procurement work has begun. Various materials planned by Guo Tailai have been purchased in succession. Stacked in the warehouse next to the dock.

Some preliminary work has already started, such as the marine system, which was developed and commissioned in the company last year. Similarly, the engine control program was started early.

In addition to the metal materials for shipbuilding and the composite carbon fiber materials used to reduce the weight of the 380, there are also a large number of room decoration materials, ceramics, pipelines, stone, expensive wood, etc. If people who don’t know see these ready The material may mean that this is to renovate the house.

However, they guessed that it was correct. Guo Tailai wanted to build a luxury yacht with a length of more than 40 meters. There are three floors, a captain and a chief engineer's cabin, two double crew quarters, and two twin cabins. There is a king-size king class suite and a deluxe king-class suite that can accommodate up to eight crew members and a luxury yacht for up to ten guests. There is also an open kitchen and a dining room and crew dining room for all guests, plus a huge living room, a bar and entertainment centre.

All the decoration on the boat is built according to the ultra-luxury standard, even the crew quarters are no exception, compared to the five-star hotel. As for the suites, not to mention, Guo Tailai directly refers to the highest domestic standards.

Of course, Guo Tailai's shot is definitely not just for luxury, he will pursue the ultimate performance. Since it is to be built, it will build the fastest yacht.

At present, the fastest yacht in the world has set a world record of 667 knots. What Guo Tailai wants to build is the only nn140 superyacht in the world that can reach 70 knots in the next few years. It has a more beautiful name called "rsnn", remember the "Black Day Crisis" in the 007 series? It is named after this.

Rsnn, Guo Tailai likes the name. After the creation, the name of the ship is called "rsnn".

Guo Tailai's biggest car, the armored bus, was only 12 meters long. The length of the ship reached 424 meters, and the difficulty of assembly increased greatly. The processing of spare parts and various fine structures can be easily done by Guo Tailai, but the final assembly will definitely take longer.

Of course, Guo Tailai will definitely not use the original n diesel engine, he has a better choice. Twenty years later, after the Rolls-Royce engine and Mercedes-Benz acquired the company, they launched a new generation of marine diesel engines, which are smaller, more powerful and have lower fuel consumption, which is obviously a good choice.

Gas turbine, the original n-jet vortex machine 40 has a maximum power of only over 4,000 horsepower. It is obvious that Guo Tailai has a better design in the future, such as Luo Luo's 7 marine gas turbine, which has higher power and can easily reach 6,000 to 7,000 horsepower. It also has the advantage of smaller size and more fuel saving. In fact, in the future, in 2012, this 7-ship gas turbine was selected as the US Navy ship-shore connector pnr, the power system of the future hovercraft.

The actual development of gas turbines is certainly not so easy. Various arguments, precision machining, and then various stages of commissioning are almost the creation of aero engines. However, these workflows have almost been omitted from Guo Tailai. Several engineers in the company who have studied aviation have also been assigned tasks to cooperate with a group of software engineers in the company to complete the development of the gas turbine control system.

Precision Machining? Even after twenty years, Luo Luo's processing ability does not dare to compare with Guo Tailai. Guo Tailai is a marine gas turbine manufactured according to the standards of aero-engines. This precision and Guo Tailai's assembly is enough to increase the standard output power by one or two percentage points.

For the two gas turbines, Guo Tailai had to work in his own constant temperature studio for half a month, only to complete the processing and assembly, and then shipped to the dock. The control program was not directly tested on the gas turbine. Guo Tailai built a simulation environment with nano-robots in his own body. He thoroughly tested the entire construction time and tested it almost at the same time as he worked. Then he found that Let the programmer modify it until it meets its requirements.

For hull processing, Guo Tailai replaces all steel materials with titanium alloys, aluminum alloys can be used for all aluminum alloys, and carbon fiber materials can be used for composite carbon fiber materials to reduce the weight of the hull as much as possible.

From the end of June, Guo Tai went to the capital city for two days and rushed to the Modu Shipyard. Until the end of August, Guo Tailai almost spent sleepless nights on this superyacht. From machining to pipeline layout, from processing metal parts to wooden furniture, from decorating to finishing, all of them are done by Guo Tailai.

Guo Tailai also enjoyed it and forgot the passage of time. During the period, I only had a few phone calls with my parents and Chu Fei. The others didn't contact each other. They all handed them over to Lin Jiayi. Before completing the yacht, Guo Tailai did not intend to distract anything.

In less than two months, the various raw materials in the warehouse changed from a raw material state to a superyacht of more than 40 meters long.

The exterior of the yacht is white in color, and on both sides of the ship's side and the stern, it is dark gold English "rsnn", shining under the sun.