Chapter 249： Geneva Motor Show (on)

When the measured metal basketball box is taken outside for close observation, basically a few experienced academicians and Liu Lao can see it at a glance. This

It is a directly processed workpiece, without any polishing treatment, but now the surface roughness that can be visually resolved has reached the level between dark gloss and bright gloss. It is only three to four levels lower than the highest mirror level.

Mirror level means that the surface roughness can reach 0.006 microns, while the dark gloss side is 0.1 microns and the bright shiny side has a roughness of 0.05 microns.

That is to say, the surface roughness directly processed is not polished, even if it is a dark matte surface, it reaches a level of 0.1 micron, and some places are still higher, I am afraid it has reached 0.05 micron. In any case, even with the worst calculations, it should be about 0.1 micron. "

The worst is also 0.1 micron accuracy? "When I heard the processing precision inferred by several academicians and professors plus Liu Lao, several leaders of the Ministry of Information Industry finally understood that why just a few academicians were all in a tearful look."

From today, we will never be necked by the European and American cards on CNC machines. "The tears of one of the leaders laughed down the cheeks, but he didn't feel that everyone else laughed at him."

"He used to be the Ministry of Foreign Trade and Economic Cooperation. When he was negotiating, he was not used by the guys to use the Wassenaar agreement." The leader, who was deeply touched by a leader, explained the tears.

"Thank you! Professor Wang! Thank you!" The crying leader went to Professor Wang and held Professor Wang's hand in both hands. He shook a few times and then changed to a second brother. , replaced by Guo Tailai. I can see that he is really happy and really happy. This

In one scene, they were faithfully recorded by the camera lens of CCTV photojournalist.

The "News Network" of the evening just broadcasted the news of several big leaders, and it was immediately the news that this ultra-high-precision five-axis CNC machining center with independent intellectual property rights was successfully developed. The video of the processing of the metal basketball box plus the basketball net was limited. Some of the video was frozen on the screen of the leader of the Ministry of Information Industry, but even the female announcer who reported the news, the tone was obvious. I heard an excitement. "

how is this possible? "The news broadcast has not been broadcast yet. This news was sent to someone in Japan in the first time. He was taking a break and refused to eat, throwing cutlery and going straight to the study."

The reaction in Europe was also fierce. Although it was almost noon, the ceo of several large CNC machine tools had been in contact with each other and began to discuss countermeasures. nice

Some people in the country were called directly from the bed to discuss the situation in response to this sudden situation.

On the second day, Professor Wang just got to work, and he received applications from several countries for academic exchanges. Of course, the focus is on coming to the country to see the new ultra-high-precision five-axis CNC machining center. For these applications for academic exchanges, Professor Wang has promised all of this quickly. This is a great opportunity for Shuimu University to show up again internationally. Come and come. country

The family did not intend to conceal this. The reason why it was broadcast on "News Network" was to invigorate the confidence of the people on the one hand, and to let the guys in Europe, America and Japan know that you can no longer block us on this. .

This kind of thing has happened more than once. If China does not have it, it can only be bought at a very high price. Even if there is money, it cannot be bought. People are blocked. As soon as Huaxia came out, the price immediately fell sharply, and the blockade was immediately released. When China was able to produce it, it immediately became the price of cabbage.

Before the European and American days, the one-micron four-axis CNC blockade was unlocked, but the five-axis machining center has been blocked, and the higher-precision machine tools are not letting go. However, this situation has been gone since last night. We have already had an ultra-high-precision five-axis CNC machining center with independent intellectual property rights. They have no possibility of getting stuck in our neck. allow

These academic exchanges allow them to see for themselves that they already have physical objects instead of bragging, so that they can fully understand the facts and make the right choices in the next decision. Anyway, just looking at the assembled machining center, you can't see the specific technical core, just look at it.

However, these things have nothing to do with Guo Tailai. On that small island, Guo Tailai actually made three parts for each component. Guo Tailai personally installed a system, and the rest was for several other senior assembly fitters to practice.

As Guo Tailai said, what the country has to do is to upgrade the entire industrial system, rather than relying on Guo Tailai to do all the work alone. Even if Guo Tailai is an iron, he can't beat a few nails, and he has to have a large number of high-level industrial workers to improve together to form a mass production scale. It can be said that now only solves the problem, and the next step is to solve the problem of mass production. Guo

Tailai can make high-precision parts. Similarly, the first machining center he personally assembled can also process parts that are slightly lower than his machining accuracy. It is enough to continue production. The problem now is not manufacturing parts, but assembly. very

Multi-precision machine tools can't achieve true high precision, because every component is accurate, but the assembly is too big to be intolerable. Unfortunately, this part of the work, no machine can replace labor. Liu

The veteran is the on-site guidance for the next assembly work. A group of senior assembly fitters who have been transferred from several units by the Ministry of Information Industry will practice assembling a second, third or even five-axis machining center here. This

The high-precision processing workshop on the island has now become a toon. However, the ownership belongs to the Southern Group. In this respect, Guo Tailai has won a good condition for Zhao Xiangbei. In the future, ultra-high-precision CNC machine tools may only be closely related to the Southern Group.

Guo Tailai now got two invitations, one was transferred by the technology company, and the other was sent directly to the garage. One was sent by Pagani and the other was sent by Mazda. The two invitations actually said the same thing, that is, invited Guo Tailai to participate in this year's Geneva Motor Show. day

The Neiva Auto Show did not know why, from the history of March to the current April, it may be related to Guo Tailai's change of history. Both carmakers invited Guo Tailai to participate in the launch ceremony of the new car, but Pagani is the son of the wind, zonda, and Mazda is the ultimate version of the rotor car rx7.

There is a Schengen visa, what are you waiting for? Guo Tailai immediately decided to go!