Chapter 190： Settle and upgrade (below)

Back home, Guo Tailai was ready to eat water, and after Zhao Xiangbei greeted the phone, he lay down on the bed and issued a system upgrade instruction. even

Two system upgrades in a few days, and a group of nano-robots were the source of accidents, which made Guo Tailai very happy.

On the other side of Afghanistan, the reason why they set the time for Huang Weiguo is best before April, because Guo Tailai learned from the dreams of the future, almost in April of 1999, the Taliban will capture Bamiyan, and then go for sure. trouble. Do not

Before that, Bamiyan was also a crossfire zone. I don’t know what the situation is now, but if Zhao Xiangbei knows that Guo Tailai wants to go to Afghanistan at this time, he will definitely not agree. Look at Huang Weiguo, are there any ways for them? real

No, there is another option, which is to go to another place based on the clues obtained from this system upgrade. "

Read the data done! ""

The system upgrade is complete! Current version, V2.03. ”

Still only upgraded a small version number, Guo Tailai has already expected this all.

"List the new features after the upgrade!" Guo Tailai squatted while waiting for the instant noodles to soak the apples. "

Increase part of the in vivo detection function. ""

Increase muscle control behavior speed. ""

Increase muscle control stability. ”

“Increase stimulating cell strengthening.”

Increase the flying speed of nano robots by 500%. ""

Increase the clarity of nano robot shooting. ""

Increase the accuracy of 3D measurement of 360 degree field of view of nano robots (requires higher precision gauge calibration). ""

Nano robot cutting accuracy is enhanced to 50nm (requires higher precision gauge calibration). ""

Nano-robot welding accuracy is enhanced to 50nm (requires higher precision gauge calibration). ""

Nano-robot surface roughness is enhanced to less than 5nm (requires higher precision gauge calibration). ”

"Limiting the distance traveled by nanobots in vitro is 10cm."

“Restricting the nanoscope's synthetic field of view to 10 cm.”

This time there are not many new features, so Guo Tailai is surprised that the flying distance of the nano-robot has increased to ten centimeters and the processing range has been further expanded. This also means that Guo Tailai can handle a larger range in one-time processing.

Nano-robots fly faster, but for the time being it seems to have little help for Guo Tailai. Once again, the nano-robot's shooting clarity was increased. When Guo Tailai opened the 360-degree field of view again, he found that it was clearer. After upgrading it once or twice, the 360 ​​field of view can be used normally. many

A 360 degree field of view 3D measurement accuracy, what is this? The accuracy of the measurement made Guo Tailai think of his own binocular 3D measurement mechanism, randomly measuring the length of an object in a field of view, and immediately got a specific size, and also received a message. "

Is the 360 ​​degree field of view 3D measurement turned on? Guo

Tailai chose it, so immediately felt that thousands of nano-robots flew out of the body. When measuring the length of the object again, the same number is obtained, but one more prompt. "

A higher precision gauge calibration is required. ”

Sure enough, this is the feature. However, Guo Tailai is also somewhat surprised. The accuracy of 3D measurement of both eyes has reached 0.1 micron. What kind of precision measurement is needed? What can be accurate? on

One calibration was performed using the laser ratio meter of the National Key Laboratory, which was calibrated to a precision of 0.2 micron. Later, the system was upgraded to increase the processing accuracy and measurement accuracy to 0.1 micron. 100 nanometers! This level has been extremely powerful in the machining of workpieces, but also needs to be calibrated? weight

After the new calibration, even the nano-robot's cutting and surface treatment can greatly improve the accuracy. Guo Tailai suddenly thought about the size of the flatness that Liu Lao asked before. He must be doing high-precision machine tools in the department. If it can be recalibrated before then, Guo Tailai can not make precision in the department. Higher plane? heart

In the sizzling, the face is also soaked, Guo Tailai Meimei's even two bowls of instant noodles, this is considered to be slow.

Just lying in bed for twenty-four hours, Guo Tailai did not want to lie at all. Incidentally, after upgrading from the big version to the second generation, Guo Tailai's system upgrade time is fixed at 24 hours. Do not

Want to lie down and open the phone, Guo Tailai saw more than a dozen missed calls. There are sisters, Ding Zong, and parents, and another is Christina Zhang Haijun Zhang Jie. Guo

Tailai first dialed the phone number of the sister. As a result, Zhao Wei picked up and just hurriedly said, "It is not convenient now." He hung up the phone.

Ding always must ask the VIP recharge recommendation, don't worry. Guo Tailai first called her parents back. Separate

In a few days, Guo Tailai always had a phone call with his parents. When he arrived yesterday, Guo Tailai shut down and went to sleep. It is estimated that his parents are very anxious. The phone called back, and the mother picked it up. Sure enough, I asked Guo Tailai how to do it. Then I blamed Guo Tai for shutting down the mobile phone and worried about them. Guo Tailai can only explain that he is tired when he is on a business trip. He has a long time to sleep, and he has nothing to do with him. This makes his mother feel relieved.

Then Guo Tailai called Zhang Jie. Zhang Jie is not in a hurry, it is to report what has been arranged for recruitment, and what is the intention to recruit new people and salary treatment. These Guo Tailai have no good suggestions. They can only let Zhang Jie come to formulate. Anyway, Guo Tailai only asks for a request. He needs to be proficient in a part of international patent affairs, as well as understand financial related knowledge and laws in Europe. Some people who are suitable for management, one and a half I may not be able to find it, I am afraid I can only wait for the news after the Spring Festival.

“Guo Zong, there is no new civilian design recently.” Zhang Haijun finally mentioned: “In fact, we have already recruited a few new international patents, and took one or two hands to practice. The actual operation is the easiest. The way to get started."

"Okay!" Guo Tailai thought about this too. After sleeping for a day and night, it was not bad to go to work. So I promised it: "When I have done it in a day or two, you can come and take things."

On the phone of Zhang Haijun, Guo Tailai gave Mr. Ding a pass. Ding couldn’t get through Guo Tai’s phone call. He definitely asked Zhao Xiangbei, knowing that Guo Tailai was sleeping, and then he didn’t bother. It is estimated that she can’t wait any longer.

"Xiao Guo, have you slept?" Sure enough, Guo Tailai heard the voice of Ding's kindness when he called.

After greeting a few words, Ding was very busy, did not make much trouble, and directly set aside dinner at night, Guo Tai was busy with the promise.

After returning to the phone, Guo Tailai thought about the small request from Zhang Haijun, and decided to do some work and stretch his muscles. After pondering it, Guo Tailai decided to make a few gadgets to supplement the company's patents, and also let the company have two more profit points, but also can train new people.

After calling Lu Zhiming here and letting him prepare some of the materials he needed, Guo Tailai took a car and went straight to the studio.