Chapter 34： On the Spring Festival

Of course, Liu Lao can't agree that his disciples have been dug away by others, but learning things is still possible.

Master Li also has a unique skill. Others are around the coil. Sometimes they have to stare carefully. Master Li’s fingers are very flexible, and the touch is absolutely excellent. Just relying on the touch of the finger, he can accurately judge The thickness of the wire determines the precise position and can circumscribe the precise coil.

In Liu Lao’s words, it’s that the old Li’s head is sensitive, and he can close his eyes and touch the level of a mahjong card. Nothing is so good. When this came out, Guo Tailai almost laughed and sprayed, and let Master Li blow his beard and blink, almost turning his face and Liu Lao.

But then again, sometimes you can't really see the eye around the coil, and the feel and experience become the solution. It is not impossible to wrap around as much as possible and then the machine is tightened, but this is still somewhat different from pure hand-finishing.

I thought that Guo Fatzi would be a weak point in this respect. But who can know that Guo Tailai has a control system and five million nano-robots in his mind? The new feature of finger touch positioning provided during the last system upgrade is simply the super version of this ability!

Guo Tailai tried, it is too simple to touch the mahjong card with closed eyes. Even the size of each mahjong tile, the depth of the ditch on the font, and whether the color is filled evenly can be touched out.

In fact, the precision of the finger tactile positioning can be measured with the accuracy of the binocular 3d. That is to say, even in the dark room, Guo Tailai can accurately measure the size to the accuracy of 0.2 micron by finger positioning.

In contrast, Master Li's closed eyes around the coil, in Guo Tailai here is familiar with basic skills plus several exercises. The accuracy is much higher than Master Li does not know.

Following Master Li, Guo Tailai studied for a week. Master Li discovered that the unique skills of the coils that he had taken pride in in his life had been learned by Guo Tailai, and even better than blue. Surprised by Master Li, he even screamed.

Time has entered December, the weather in Beijing has been dripping into ice, but Guo Tailai has been in full swing during this time. No need to apply for funds, Professor Wang and the department allowed Guo Tai to "noisy". Anyway, they all know Guo Tailai's standard. The worst will also get a brand new old lathe, so let go of Guo Tailai and Liu Lao.

Guo Tailai also did not draw drawings at all. All the things were in Guo Tailai's mind. Basically, Guo Tailai did it. First, semi-finished products are made in each workshop, and then hand-finished in the dust-free work room. The daytime is basically consumed on this lathe.

For Guo Tailai just to be a lathe but need to re-do a motor, Liu Lao does not think there is anything wrong. He does not doubt Guo Tailai's processing ability and the ability to learn the coil. The only worry is that Guo Tailai's ability to design motors.

After all, Guo Tailai is only a student of the fine instrument department, not the motor department. In particular, Guo Tailai was definitely a scum before the school. Can he really design a combined motor?

"Don't worry about Master." Guo Tailai is not in a hurry. He is not designing a stepper servo motor. It does not require software control. All he needs is a power, stable and adjustable speed, low noise, quiet and stable jitter. Brush the motor only, as long as you can do this by changing the voltage. In the future, there is a complete object in the dream. Can you still do it?

Over time, the semi-finished parts of the lathe are manufactured one by one, rails, bearings, gear boxes, lead screws, motors, claw plates, tool systems, tail tops, etc. All are semi-finished products, leaving only the last step to the highest precision. This time, the fat man is very hardworking, working overtime every day, and the speed is very fast.

Then there was a series of heat treatments, and all the semi-finished products were processed again. At this time, Guo Tailai also stopped.

All the finished semi-finished products, in addition to the motor, are again stored in a simple storage room. This room has only four pillars and one roof, in order to store these semi-finished products for a period of time, eliminating the stress accumulation caused by the processing.

Of course, this time is relatively short, not a few years, and after two or three months of heat treatment, it is almost the same. After the winter vacation, the final finishing and assembly can be carried out in a maximum of one month.

Time has passed in January, and it will take a few days to get a winter vacation. Guo Tailai is also a good rest before the holidays.

Zhao Wei looked for Guo Tailai before the holiday, but it was not for Guo Tai to do anything, but to make an appointment to let him recreate two sets of modified gyroscopes after the winter vacation. This will be her last revision, and then she will participate in the spring doctoral thesis defense with the real thing. At most, the Zhao will graduate.

During this time, Guo Tailai has also been inquiring through other channels to inquire about the Famen Temple Buddha's finger bone relic. The Buddha's finger bone relics are now properly kept by the Famen Temple. The general exhibits are also the jade-like "spirits", also known as "hard bones", imitations. Usually want to get close to the real thing, unless there is a very deep background, or have a deep friendship with the monks of the Famen Temple, otherwise it is impossible.

However, one day is the exception, that is, the "Buddhist Day" of the eighth day of April, also known as the Bathing Buddha Festival. On this day, the Famen Temple will hold a grand ritual, and at the same time, the authentic Buddha skeletal relic will be invited to worship by the believers. This year is obviously not catching up. On the eighth day of April next year, it is the 14th day of the solar calendar.

This is Guo Tailai's ability to find the most likely way to get close to the Buddha's relic. Despite his heart, Guo Tailai can only wait for his temper to wait for the Buddha's birthday. This is why he can sink into a lathe.

After a few days, watching the schoolmates madly review the crazy exams, Guo Tailai was very comfortable and asked the school to book a half-ticket in advance, followed the student army who went home on vacation, and went home with the train.

The parents of the old family in Jin Province have already waited for the eyes after they received the call from Guo Tailai. As Guo Tailai came home, the family immediately became a sea of ​​joy. Guo Tailai's favorite noodle Ding Yumei has already given a good meal, and Guo Jianjun, a halogen, has already done well, just waiting for Guo Tai to come back and put it down.

Guo Tailai was hungry for a long time on the train. She didn’t eat at noon. She had to endure the night and waited for the handcuffs that this mother had personally made. Holding a big bowl, eating snoring, is like a starving ghost.