Chapter 257

Shen Cong was terrified by the huge movement of the dual core totem cutting device. He was afraid that in this high-speed running state, he might explode.

The violent active waves from the outside world are many times stronger than the strong storms.

Even if we don't do the engine research on the dual core totem device, only the storm which is bigger than the golden dragon totem is enough to be included in the history of his personal research and invention.

Three minutes later, Shen Cong separated the two totems, and the scene gradually subsided.

After checking each other, we found that the ox demon king totem changed little, but the surface of the boar King totem had produced tiny cracks.

"At high speed, the resonance field is distorted, and the tusk active core of the boar king can't withstand this distortion." Shen Cong quickly figured out the reason. The low-quality active core was still a little poor.

It can also be seen that the loss of the active core of the device is very large, far greater than that of the dual nuclear active resonance field.

This loss is understandable, after all, setting off a more powerful active storm.

It is impossible that two low-level totems, without any consumption, can burst out more powerful effects than high-level totems.

Despite the loss, Shen Cong is still surprised.

It has been proved that although the cutting resonance field can not produce electric current, it can twist each other and produce a huge repulsion force. Depending on this repulsion force, another device for generating kinetic energy can be made.

As long as kinetic energy can be generated, it means that both power generation and engine can be realized.

And the most important thing is that this device is based on the use of activity, and its own consumption is not large.

There is a kind of civil science style of perpetual motion machine.

Of course, it is not a completely non consumption work. Ordinary totems will generate two kinds of power consumption: one is active guided injection to maintain the stability of the resonant field; the other is the consumption of the active core itself, which will accelerate the service life of the active core.

In addition, in order to maintain the stability of the two totems, the active consumption increases greatly, and the active core lifetime is further reduced.

For example, the tusks of these two wild boar kings can be used as totems for at least three months. However, in just a few minutes, the tusks of King boar have already produced cracks and are on the verge of destruction.

"Therefore, a large number of high-quality active cores are needed to utilize the cross cutting device."

"I can afford it."

Shen Cong's hair, nails and teeth are all about to grow out. He hasn't had time to check his condition, but at least he is several times stronger than before he didn't enter the LV1 era.

If the strength is strong, it is not too difficult to hunt powerful golden beasts. High quality active core can be supplied continuously.

The active core can be guaranteed, and it is not difficult for the great Vajra to maintain the totem running.

In other words, we can continue to develop how to convert the work done by the dual core totem cutting device into usable kinetic energy.

Shen Cong took out the paper and wrote on it: "guide resonance, cut each other, entangle and repulse each other, inject vitality, maintain operation, generate storm, run at high speed, absorb activity If one end is fixed, one totem is fixed, and the other is mounted with gears, is it that only the totem with gear will rotate and double speed up? "

"From the previous experiments, we can see that the field between the two totems has mutual repulsion in the field, which drives the totem itself to rotate. The closer the repulsion, the more obvious One is fixed as the rotor, and the other is telescopic as the stator. This interaction can act as an engine! "

……

In Shen Cong's mind, the new dual core totem cutting device is becoming more and more clear.

Quickly take up the pen, draw a new design drawing on the paper, and write "totem engine" in the upper left corner of the drawing.

Totem engine relies on two totems, rotor totem and stator totem.

The rotor totem is a base disc with two active cores inserted symmetrically on the left and right sides, with smaller diameter. At the same time, a central shaft is connected with the rotating gear outside the engine as a way of kinetic energy output.

The totem of the rotor can rotate, but the chassis is fixed, can not move left and right, and can only drive the central shaft to rotate.

The stator totem is a larger diameter disc with two symmetrical active cores. The stator totem has no central axis and is fixed and cannot be rotated. However, the whole body can be retracted. When pulled up, the stator totem is separated from the rotor totem, and when pressed down, the stator totem covers the rotor totem.

When the totem starts to work, the rotor totem runs at high speed, driving the gear of the middle shaft, and the external work output.

The stator totem relies on the degree of expansion and contraction to complete the work of gear shifting for acceleration and deceleration.

In this way, a perfect totem engine is made!

"Hoo!"

Putting down his pen and picking up the drawing, Shen Cong breathed out a long breath. He felt that the design was reasonable and effectively solved the problem of engine speed regulation.If you can't adjust the speed, the engine can't be used directly - how can an old driver drive.

The totem engine has been formed on paper. The next step is to make experiments continuously, take all aspects into consideration, and assemble a rudimentary totem engine for calibration.

After everything is in order, we can transform the big King Kong engine and add totem engine.

……

It was dark before I knew it.

During the whole day, Shen Cong spent all his time in the experiment, especially all his energy was put into the totem engine.

Finally, in the evening, he made the first experimental totem engine. The experimental machine is placed on the corridor in the carriage, and its body shape is somewhat large, mainly because the active core used is relatively large.

Electronically controlled shifting.

A generator is connected to the rotating shaft and a light bulb is installed.

"Eat first, get rid of the rest of the experiment, and immediately test the effect of the totem engine."

Shen Cong also has three groups of experiments on his hands. The first group is the banyan yogurt feeding experiment of mibaofeng, and the results have not been observed for the time being; the second group is his own banyan yogurt stimulation experiment on bone development. He did not drink yogurt all day, and found that the growth of teeth, nails and hair was not obvious.

The third group is black head live pearl, Ficus yogurt mixed feeding experiment, the activity of blackhead increased again, but the body changes have not been observed.

After recording the experimental data, Shen Cong spent another half an hour in the flower house. His peach trees had already borne fruit, with more than a dozen immature active peaches hanging on them.

The lotus seeds have been harvested, and the potatoes have begun to sprout.

Unfortunately, no new honey source has been found yet. The production of honey bee honey bee has been stopped, and the supply to him has also been cut down. In particular, royal jelly is only enough for queen bee.

"We need to find new flowers. The climate around the oasis has changed, regardless of winter and summer. We should be able to find honey nearby."

After leaving the flower house and going to the ant nest for a few minutes, all the ant eggs laid by ant Lishen are now huge, and the earliest one is about to hatch out.

King Kong ant colony is developing rapidly.

After all this, Shen Cong took a five minute break and began to study the totem engine. (to be continued. )