Chapter 2319

The weapons of mass destruction (WMD) brought back from Japan were finally put on the experimental platform. However, all the people standing around were isolated 10 meters away. A telescope like object was fixed on each person's head to observe the large-scale lethal weapon more than ten meters away. The specific operation was completed by several groups of mechanical arms suspended on the roof Yes.

This manipulator is not a computer-controlled robot arm. It is a linkage mechanism composed of ordinary lever, gear and spring. The operator puts his hand into the glove like a manipulator here, and then how he moves, the manipulator over there will move. It's just a very ordinary mechanical transmission, but our accuracy is quite exaggerated.

The reason why we have to separate researchers so far from the weapons of mass destruction in front of us this time is actually for security reasons. After all, the things in front of us are too dangerous, so our temporary laboratory has made a little special protection for this. It's not a simple workbench that supports that weapon of mass destruction. It's actually empty under it, and there's a vertical well that goes all the way through the earth's crust and into the mantle.

If there is an accident with the weapon of mass destruction in front of us, the entire test bench, together with the surrounding three layers of crystal parapets, will descend to a depth of 2200 meters below the ground in five seconds. Even if it really explodes, it will never hurt people. This is the best protective measure that we can think of now, and generally there will be no problem. The only thing to worry about is the explosion of this device. If it is an instant explosion with zero delay, we can only hope that the three layers of crystal parapet can last for more than a second.

"Do you want to start dismantling now?" Asked a research player.

"A little longer." A NPC scientist's voice came from a crystal communication machine nearby, saying: "I just heard the notice from the executive department of the guild that the president will come to your side later. Please wait for a moment."

"Don't wait. I'm here." Just as several people were talking, I just pushed the door and came in.

Several researchers simply said hello to me, and then one of them began to ask, "can we start now?"

I nodded and said, "what are you waiting for?"

After listening to my words, several researchers quickly ran to their respective operating positions and put their hands into the operating gloves. After trying to move the fingers, the opposite manipulator immediately followed the accurate movement, just as convenient and flexible as the researchers' own hands.

"All right, get ready to go." The most skilled of a group of researchers said from a central console.

Several player researchers around immediately nodded their heads and began to focus their attention on the weapon of mass destruction in the center. As the researcher in the center started to operate the manipulator and picked up a cross shaped screw spinner on a nearby table, he ordered several other people: "keep an eye on the status monitor for me, and let me know if there is any change."

"OK, Goldfinger, you just tear it down, and we'll watch it for you."

After getting the answer, the person in charge of the operation began to concentrate on controlling the robot arm. First, he used the screw spinner to press the screw hole on the side of the weapon of mass destruction. Then he shook the handle behind the rotator, and the front rotating head immediately began to fly. With the rapid rotation of the rotating head, the screw was visible to the naked eye The speed quickly withdrew from the screw hole, and finally completely separated from the main body and was removed.

In fact, the function of this kind of screw rotator is the same as that of a screw driver. The difference is that the speed of the screw under this tool is much faster than that of the screw driver. What's more, it doesn't need to hit the screw interface frequently. For some equipment that needs high precision, the rotator is obviously more useful than a screwdriver.

There are not many screws on this weapon of mass destruction on the console, but none of them are very long and fixed very tightly. It is not possible to get them out with ordinary screwdrivers.

Soon after a circle of several screws were removed, the operator immediately used a suction cup to suck the outer shell at several places, and then pulled it outwards. A relatively large metal plate was immediately removed. Several researchers nearby quickly helped to remove several connected metal plates beside the metal plate. The shell of this weapon seems to use the same design as the Luban lock. Except that the first metal plate is fixed with screws, the remaining metal plates are all pressed under the metal plate, and the rear fixings are also nested one by one. All of them are stuck together. As long as the first piece comes down, the rear parts will fall apart.

"How could it be such a design?" A researcher looked at the scattered metal shields and asked in surprise. As soon as the first researcher took apart the guard board, they immediately found that other guard boards began to loosen, so they used their own mechanical arm to help hold those shields. Who knows that before supporting the whole body, they had already disintegrated, and they fell to the ground. The whole internal structure of the missile was completely exposed to the air.

Several researchers nearby are also looking at the shell guard board all over the floor. They just removed a fixed plate, but they didn't expect to have such a reaction."Was it designed on purpose?" I looked at the researcher over there and said, "I have seen live fire pictures before. When this thing explodes, it will spread a kind of particle light particles around. Can it be because the thing itself needs to spread out and erupt, so it has set up a kind of shell which is convenient and quick to fall off?"

After hearing my warning, several researchers over there began to think about it, and then nodded one after another to indicate that it was probably what I said. After all, the explosion mode of this thing is a bit like a cluster bomb. Particle dispersion is required before the actual killing occurs. In this process, the outer shell will only hinder the work of its internal parts, so it must be within a very short period of time Let the whole shell fall off, and this kind of nested shell is obviously very suitable for this situation, because it can easily break the whole shell. As for the strength of this kind of shell, I don't think it's a problem at all. This is a weapon, not a armor. The only function of its shell is to prevent the internal structure from being collided during transportation and launching. This kind of shell is not used for protection at all. In terms of the volume of this thing, even if it is a solid metal rod, it is absolutely easy to be damaged, so for it, the protection is not really important.

After understanding the design of the shell, it is the demolition of the real internal structure. The internal structure of this thing is quite complex, using a lot of metal screws and magic fusion agent to connect. The screw is easy to do, just screw it off, but the magic fusion agent is troublesome.

The properties of this magic fusion agent are similar to model glue. People who have played with plastic models may know that there is a special glue for models. It doesn't have any stickiness, it doesn't stick other things together, but it can easily make plastic and plastic stick together. In fact, this kind of glue doesn't make two pieces of plastic stick together at all. It melts the plastic surface it contacts. Because this special glue for model has strong volatility, when it evaporates naturally, the dissolved plastic will solidify again and become a whole. It's like two pieces of ice. You press them together, melt their contact surfaces with fire, and then freeze them again. When the melted ice freezes again, the two pieces of ice become one piece of ice, and you can't find a crack.

This magic fusion agent has a similar ability, as long as it is the same material, it can make the two quickly connect together, even if you can't find the connection trace with the ultrasonic flaw detector later. Of course, although the internal fusion is very thorough, but the outer joint will appear some unevenness due to the softening process in the connection process, so it is not difficult to find the connection point, which is not much different from that of a casting piece. Even if you find it, you can't use it.

Although our technicians quickly removed all the screws, we had a headache at the connection points connected by the fusion agent for a long time. Finally, a NPC technician who used a communication device to remotely observe the disassembly process came up with a solution. The method he proposed is actually very simple, that is, let the golden bug to help gnaw away these junctions.

Compared with our equipment, the way of biting goldbugs is more rapid and accurate, and will never bite the things that should not be bitten. We should know that these seemingly integrated metal structures are not completely solid. Some steel beams and other things have holes in them, and there are wires and other things in these holes. If we let us install the equipment, it will be no problem to remove the steel beams. However, it is estimated that these wires will not be left behind. They will be cut off together. So we can't hurt the wire and cut the steel beam. We can only rely on the insects to help.

Next to the steel city is our guild's breeding base of Zerg. The goldbugs have been helping us to mine steel in the steel city, so it's very easy to get some here.

With the help of gold bugs, the steel beams were quickly cut open, and the researchers carefully teased out the wires, bit by bit, to find the source and divide the uses of various instruments. If it can be dismantled, it will be studied. If it can't be dismantled, it will not be moved. Finally, after eight hours of hard work, the first whole weapon of mass destruction has finally become a large number of parts in front of us.

In fact, these are not basic parts. The pile in front of us should be said to be just the partitions that we can disassemble initially. Some parts are actually composed of many things, and even parts with different functions are connected together, but they still haven't been disassembled because they don't know how to dismantle them or dare not dismantle them.

"President, that's all we can do so far." At this time, all the researchers, who were already exhausted, sat on the ground without any image. This thing in front of us is so big that its power is equivalent to a small tactical nuclear bomb. If it is you, let you start to dismantle the nuclear bomb, you will have no burden in mind? It is because of the burden that these researchers have been in a state of high mental tension during the whole process of dismantling, which is the same as the doctor performing an operation on the operating table. It is really fatal if you are not careful. However, if a doctor has a problem, it is not himself who died, but only one person died. If they have a problem, not only they themselves will die together, but also how many people will be involved. Therefore, the psychological burden of these researchers can be described as greater than that of doctors when they perform surgery.Looking at the tired researcher who seemed to fall asleep at any time, I quickly comforted him and said, "it doesn't matter. It's almost as if you can tear it down here. You all go to have a rest, and I'll arrange the later things."

"Good president." Several people answered and went out like walking dead. Even if they want to rest, they can't rest here. It's better to go back to Eisinger and use his advanced sleep system to assist sleep. It's better to use that thing to assist sleep than in reality.

They went to have a rest, but I couldn't run. I had to deal with this mess. First of all, the pile of things under the console should be transported away first. These are the metal keel and some integral casting parts without internal structure in the weapon of mass destruction. These things account for a large proportion in the interior of the weapon of mass destruction, but they are not technically sophisticated and are also very safe. In the past, they were all tied together with weapons of mass destruction, so we can't mess with them. Now that they are dismantled, they can be sent directly to the New World Research Center for analysis and research. Anyway, these things will not explode.

In addition to these fixed metal parts, there are also some functional parts inside this weapon of mass destruction, which are used to control or operate the weapon of mass destruction, and have no direct relationship with its lethality. Therefore, they can be regarded as safety components. These things can also be transported away and studied slowly. There is no need for further research in the high-risk laboratory here Research. Although our guild has temporarily built such a research room here for this dismantling, it is still a temporary thing. All kinds of experimental equipment and personnel are not enough. Moreover, it is too dangerous here. I dare not let the senior NPC researchers of our guild come here. Therefore, in order to speed up the research progress, we should send the things to the research site.

After removing the non explosive or non lethal parts, there are only two things left on the test bench.

"Is this the explosive part?" The researchers, who observe the console remotely through a communicator, said.

I stood in the position of the previous operator, replaced him with those robotic arms, grabbed the two devices connected in series by two pressurized magic wires, and then said, "notice, the large object on my left hand shows a high energy response, but the perspective shows that there is only a liquid substance inside this thing, and there is no mechanical part in it The thing on his right hand is small, but the internal structure is very complicated. We suspect that this is the detonator. The problem is that the two are now connected. We don't know how to separate them. Do you have any comments? " (to be continued. If you like this work, you are welcome to start（ qidian.com ）Your support is my biggest motivation to vote for recommendation and monthly tickets. )

www.novelhold.com , the fastest update of the webnovel!