Chapter 543

Li Tianyu thought about it and decided to blow a cow to have a try.

It's just chip manufacturing.

The foldable flexible screen is done, and this can still be done.

Li Tianyu also specially inquired some information to avoid his boasting. After all, chip production is too professional, and even much better than LCD panel manufacturing.

In fact, chip production, professionally speaking, is wafer production.

The chip production line is the wafer production line.

Wafer refers to the silicon wafer used to make silicon semiconductor integrated circuits. Its raw material is silicon.

Of course, now some domestic units are vigorously studying carbon based chips, which also seems to have the prospect of mass production, but that is another set of technology system.

Today's chips are developed on the basis of silicon wafer technology, so the production line must also use such technical standards.

Anyway, first solve the problem of lithography. As many media say, without lithography, chip manufacturing or anything, everything is useless.

Li Tianyu pretended to blow a cow about the lithography machine, and then started operating the system as usual.

Open the system interface and enter the order center.

Interface display: List refreshing

To be honest, Li Tianyu is really a little nervous. I don't know if the system can brush out the lithography machine.

It's hard to buy a lithography machine now. According to normal channels, Netherland's asmai lithography machine can't enter China.

Of course, asmai is not the only one that can produce lithography machines in the world, but its technology is a little backward.

But if Li Tianyu wants to buy, he must buy the best. There is no doubt about this.

After a while, the list finally refreshed.

Li Tianyu looked, good guy, there are really many.

[equipment name]: lithography all-in-one machine

[equipment function]: silicon wafer chip manufacturing

[operation mode]: Manual

[production accuracy]: up to 56 NM

[manufacturer]: beilish [Germany]

[tax amount]: 250000 soft currency

-------------------

[equipment name]: lithography all-in-one machine

[equipment function]: silicon wafer chip manufacturing

[operation mode]: semi-automatic

[production accuracy]: up to 28nm

[manufacturer]: Nikon [Japan]

[tax amount]: 530000 yuan in soft currency

--------------------

[equipment name]: lithography all-in-one machine

[equipment function]: silicon wafer chip manufacturing

[operation mode]: fully automatic

[production accuracy]: 28nm

[manufacturer]: Canon [Japan]

[tax amount]: 680000 yuan in soft currency

--------------------

[equipment name]: lithography all-in-one machine

[equipment function]: silicon wafer chip manufacturing

[operation mode]: fully automatic

[production accuracy]: 3nm

[manufacturer]: asmai [Netherlands]

[tax amount]: 725000 soft currency

--------------------

[equipment name]: lithography all-in-one machine

[equipment function]: silicon wafer chip manufacturing

[operation mode]: fully automatic

[production accuracy]: 1nm

[manufacturer]: mysterious X Group Company

[tax amount]: 988000 soft currency

There are five pieces of information on one page, all of which are full.

Yes, it's all lithography machines.

There are many types of lithography machines. Only the types of silicon wafer chip manufacturing are shown here.

This is also Li Tianyu's special request to Li Tianyu.

Li Tianyu carefully browsed the system order list. According to the Convention, it was arranged from low end to high end from top to bottom.

Just like rumors, the production countries of lithography machines are Germany, Japan and Netherlands.

There should be other countries, such as the United States of America, but it didn't show up.

Either it needs to be refreshed, or the share of lithography machines in those countries is too low, so it's not worth mentioning.

In front, the German products are relatively low-end, and there are manual ones. Of course, the tax required is also quite low. It only needs more than 200000 soft coins.

In the future, Japan and China are relatively better. There are semi-automatic and full-automatic ones, Nikon and Canon respectively.

Both companies are giants in SLR cameras and optical equipment. Of course, their attainments in lithography will not be too low.

In fact, in the 1970s and 1980s, the angry lithography machines of these two companies in Japan and China occupied an absolute dominant position in the world.

However, for some complicated reasons, asmai of Netherland was supported, and canon and Nikon gradually fell behind in the lithography business.

So now asmai's lithography machine should be the most advanced lithography all-in-one machine in the world.

The latest asmai lithography machine can theoretically break through the technical limit of 3nm.

In contrast, Canon and Nikon can only stay at 28 nm without inch.

Of course, asmai's lithography machines are not in stock. They are only produced after large enterprises place orders, and few are produced in a year.

Small businesses want to buy? That's no way.

At present, domestic enterprises do not have access to asmai lithography machine in Netherlands.

Li Tianyu smiled when he saw asmai's lithography machine.

It seems that boasting about the tax system is really a big criticism. The impossible thing is not a thing in front of the system.

The tax is indeed a little higher, reaching 720000 yuan.

However, for Li Tianyu, it is nothing at all.

But why didn't Li Tianyu choose, because there was the last item, that is, the fifth item.

The physical manufacturing limit of this last lithography machine has reached 1 nm, which is higher than asmai's lithography machine!

You know, with the current technology level of chip manufacturing, when it reaches below 7 nm, every step is very difficult.

1 nm, according to the current technical level, I dare not think!

Which manufacturing company is so good? Actually produced a lithography machine that can make 1 nanotechnology chips.

Li Tianyu was stunned.

Mysterious x group, what ghost company is this?

Li Tianyu remembered that he had seen this company in the system list before. At that time, he wanted to get an improved solution for the foldable flexible screen.

Anyway, the tax amount is more than 990000, almost reaching one million soft coins.

Since there is a better choice, asmai's lithography machine will stand aside.

It is also possible to successfully avoid encountering technological blockades from abroad, especially the United States.

What else do you say? Pay the taxes quickly, so as not to have a long dream.

[tax payment information]

988000 yuan soft sister Coin - deduction successful

[item information]

All in one lithography machine [mysterious x group company] - success

Li Tianyu breathed a sigh of relief.

The most difficult lithography machine is finally done.

Although the mysterious company of X Group is a bit like a fake company, Li Tianyu has paid a tax of one million soft sister coins at least. Presumably, the system will not fool him with things of poor quality.

Then Li Tianyu began to arrange other equipment.

In addition to the lithography machine, the etching machine is also a very important equipment, and the price is also quite high, often several hundred million US dollars.

However, relatively speaking, the etcher has more options.

Li Tianyu handled all the big pieces at one go.

Although not much, it also took nearly an hour.

It's a great loss of energy. I can't move on the sofa.

To be honest, Li Tianyu thinks using the system is also very energy-consuming.

Li Tianyu opened a can of beer, drank a few mouthfuls, calmed down, and finally recovered some.

At this time, Li Tianyu suddenly thought that when the machinery and equipment of the production line arrived, there was no place to put them.

To be exact, a new plant is needed to install the wafer chip production line.

This is no small matter. Li Tianyu immediately called Lu Hui.

Lu Hui seemed busy and didn't answer the phone.

Li Tianyu didn't call again and just watched TV there.

A moment later, Li Tianyu's cell phone rang. As expected, Lu Hui called back after seeing that he missed the call.

Lu Hui: "boss, did you call me?"

Li Tianyu: "yes, what are you doing? Are you doing anything serious?"

Lu Hui: "boss, I'm just doing business. I was in a meeting just now."

Li Tianyu said, "Oh," by the way, I'm calling to ask you something. "

Lu Hui: "what's up? You say."

Li Tianyu: "is the new factory building ready now?"

Lu Hui: "light blue side?"

Li Tianyu: "it's all right over there."

Now Luhui is building large-scale construction, and Jiaxin and Guanglan electronics are building new plants.

This is also normal. After all, the orders of the two factories have been soaring recently, and the benefits are very good.

Therefore, there is an urgent need to expand new plants and strengthen production lines to alleviate production pressure.

Lu Hui: "there are two factories in Guanglan that are about to be completed. Now they are under internal decoration."

Li Tianyu: "when will it be completed?"

Lu Hui was confused and didn't understand what Li Tianyu was going to do, but he still said, "if you hurry, you can finish it next week."

Li Tianyu: "reserve a factory. I plan to go to the new production line."

Lu Hui was stunned: "new production line? Boss, what production line? Or LCD panel production line?"

Li Tianyu: "of course not. It's a silicon wafer chip production line."

Lu Hui didn't react for a moment. After several seconds, he gave a big "ah".

Lu Hui: "boss, are you crazy?"

Li Tianyu: "you're crazy! No big or small."

Lu Hui suppressed his restless mood, calmed down and said, "sorry, boss, I'm too excited. Isn't that true or false?"

Li Tianyu: "nonsense, of course it's true. It's business. Why should I lie to you?"

Lu Hui: "chip production line?"

Li Tianyu: "chip production line."

Lu Hui: "what, what specifications? Boss, I, I mean, how many nano chips can be produced?"

Li Tianyu: "Comrade Lu, do you think I will build some obsolete production lines? Even if you don't say anything, I don't think I will occupy a place."

Lu Hui: "what do you mean..."

Li Tianyu: "if you play to the limit, you can reach the process of 3 nm."

Lu Hui remained silent for a long time, longer than that just now, as if he had fainted.

Li Tianyu: "Hello, Mr. Lu, are you still there? Can't you go to the meeting again?"

Lu Hui: "no, no, boss, when will the production line you mentioned... Arrive?"

Li Tianyu: "it should be soon. Anyway, you try to get the plant ready next week and be ready to receive machinery and equipment at any time."

Lu Hui: "OK, boss, don't worry. I'll let the construction team work overtime. If I can't, I'll pay more overtime."

Now the efficiency of the two factories is good, and Lu Hui's confidence is also full. After all, there are real gold and silver in the financial accounts, which can be compared with everything.

Li Tianyu: "don't let too many people know about this. Just tell some core personnel about it."

Lu Hui understood that this matter was really important and immediately agreed.

Building a wafer factory is a big event. If you don't make good preparations, it will leak the news, which may have a serious impact on future development.

Li Tianyu talked to Lu Hui about some things that didn't exist, so he left and hung up.

Everything was under control, and Li Tianyu finally put his heart down.

Next, wait for the machines and equipment to be in place, install the silicon wafer chip production line, and then find a way to find a wafer chip expert team, so as to start work smoothly.

By the way, Li Tianyu remembered the bet with Xia Lei.

At that time, you can talk to Xia Lei and invite him to the factory to see if this is a top silicon wafer chip production line.

As for whether the chip technology R & D team mentioned by Xia Lei exists, Li Tianyu is not worried.

Xia Lei has quite a wide range of ways, and he is a person of this position. Generally speaking, he will never boast or talk.

Because thousands of eyes are staring at Xia Lei.

And Xia Lei is actually happy to see Li Tianyu build a silicon wafer chip factory.

Why?

Because Xia Lei is an investor and a top investor in China. If there is a promising chip factory in front of him, can he not put money in his mind?

So Xia Lei is encouraging Li Tianyu to make a big move. If Li Tianyu is really successful, Xia Lei will go all out to support the R & D personnel and R & D team.

Li Tianyu thought that Xia Lei would talk about cooperation with him at that time.

For example, exchange technical talents for equity.

Will Li Tianyu accept such conditions?

Li Tianyu really has to think about it.

But not now. Li Tianyu has a headache.

He hates working the most, but now he has to "go to work", which is really annoying.

Just as Li Tianyu was about to start drinking beer, the mobile phone rang again.

Li Tianyu reluctantly picked up his mobile phone and looked at the caller ID.

what the fuck!

It's AI Heping.