Chapter 368

The last chapter is wrong. It has been changed. If you have subscribed to the wrong chapter, just click it again. Today it is equivalent to three chapters.

Until then, shendun Automobile Co., Ltd. can be regarded as a large-scale automobile manufacturing company with full independent R & D and manufacturing capabilities. It can completely get rid of the dependence of core auto parts on the outside, and completely achieve self-sufficiency. It doesn't need to look at the face of any supplier, and it doesn't need to worry about being strangled and pinched.

Of course, what we are talking about here is only the three core components that are controlled and monopolized by a few manufacturers, especially several major automobile groups.

As for other parts such as interior decoration, seats, lights and so on, which have little technical content and are relatively messy, they are still purchased from the outside to save time and energy.

After all, shendun automobile company has only been established for less than two months, and its development has been very rapid. If we complete the production of all parts by ourselves, we need to purchase a large number of equipment and hire more corresponding personnel. If the stall is too large in a short time, it will have a bad impact on all aspects of management and production.

Moreover, the profit of these non core links is not very high, so there is no need to spend a lot of time and energy and invest a lot of money in it.

What Chen Mo wants to develop is a high-tech enterprise, not a human intensive electronic factory.

Therefore, all links with low technology, low profit and low efficiency will be produced by outsourcing.

It's not necessary to produce screws on your own when manufacturing a car. As long as you master the most core technology and production links, don't be caught by the outside world, and grasp the highest profit rate and production management efficiency, some unimportant links with high investment and low return are unnecessary.

In addition to the adjustment of shendun's own production departments, Chen Mo also separated some personnel from the original processing workshop, assembly workshop, R & D department and other departments to establish a new company.

Shendun machinery company!

After the production and construction of the previous automatic production line, they have already possessed the production capacity of mechanical equipment such as manipulator. This time, the first phase of the industrial park was completed. While adjusting the production workshops of shendun automobile company, Chen Mo simply separated the part of mechanical manufacturing directly and established a new mechanical manufacturing company in the reserved new plant area.

Chen Mo doesn't just divide the original workshop into two parts.

Since Chen Mo took over the automobile company, the personnel department of the company began to recruit a large number of personnel for various positions at the request of Chen Mo, but because of the screening and inspection of Jarvis, a large number of unqualified personnel were eliminated, and the recruitment speed of personnel was not fast, but in the past more than a month, many people also joined through the review, which is exactly what happened With the help of these people, the auto automation production line can be built in such a short time.

Now that the production line has been completed, although the orders of "Knight" have increased a lot, there are still some surplus personnel.

This time, the establishment of a separate machinery manufacturing company is based on a part of the old employees of shendun automobile company as the backbone to mobilize these new employees.

Since the equipment of the machinery company is purchased separately, there are not many old employees drawn from the company, and the production capacity of shendun motor company itself has not been greatly affected. However, the machinery company quickly put into production after all the plants, equipment and personnel are in place. However, this time, it is not the equipment of the manipulator related to the automatic production line, but rather the equipment of the manipulator Machine tools, forging machines and other basic industrial equipment.

Like the manipulator, Chen Mo has a complete set of technical data and drawings, equipment, professional workers, engineers and technicians. Although there will be some troubles in the early stage, it is not a problem to make them.

Chen Mo copied technical drawings of various advanced industrial equipment from Hydra. With this machinery company, these equipment can be gradually transformed into finished products and applied to Chen Mo's commercial empire.

After all, it's too much trouble for him to use space to bring equipment from the movie world. Not only is the amount of equipment he can bring back each time limited, but also not necessarily every time.

And it's easy to doubt that a batch of too advanced equipment suddenly appeared out of the sky, so Chen Mo, the equipment he brought from Hydra, put it all in the basement of the castle and kept it for his own use.

The cost is too high and the delivery time is too long to buy one from outside. In addition, at this stage, it's good to say that the technology level of the product is not too high, and the purchased equipment is enough to meet the production demand. However, with the development of the company, there will be more advanced and cutting-edge products in the future, and the equipment at the current world technology level will not meet the demand.

Since Chen Mo has a complete set of technical data, he can completely produce by himself.

On the one hand, in order to train and train the employees of the company, on the other hand, it is inevitable that too advanced equipment will be produced suddenly and cause suspicion. Chen Mo first came up with some technical data and drawings of basic industrial equipment that are equivalent to the current world's advanced level.

These equipment can meet the needs of the current stage. With the development of the company and the improvement of personnel technology and experience, we can gradually provide equipment data with higher technical level according to the needs. In this way, we will not be too suspicious.Although the first phase of shendun Industrial Park has been completed, Su Wan has not been idle. On the one hand, she has to take care of Chen Mo's life, on the other hand, she has to be busy with shendun automobile company, and she has to prepare for the second phase of the industrial park.

Although the area of the first phase of the industrial park has been very large, in addition to the occupied by shendun automobile company and the newly established shendun machinery company, as well as the factory buildings reserved for later expansion, there are still many vacant buildings.

But with the development of the company, the later the company's expansion speed will be faster. If it's needed, it's too late to start construction, so some planned projects must be built in advance.

Su Wan's daily busy degree is not much different from that before. Chen Mo simply leaves the work of shendun machinery company to Anna.

Just came to the company less than a month ago, she was so valued by the boss. Anna was very happy, but she also worked hard. The establishment of shendun machinery was faster and smoother than Chen Mo expected.

On this day, Chen Mo once again came to the company. After inspecting all departments and factories, he listened to the reports of the leaders of shendun automobile company and Su Wan and Anna on their recent work in the conference room.

"Knight" sales are still high, although not as crazy as before, and there are nearly 100 new orders every day.